Click to view Operator’s Manual
For 2″ to 10″ (50-250 mm) Drain/Sewer Lines
Features –
- A gasoline engine makes the Model K-1500G well-suited for cleaning lines in remote locations where electrical power is unavailable. Cuts through roots fast.
- Unique, easy-to-use, instant-acting cable clutch maximizes operator control. Pull down on the handle and the cable spins at 600 RPM. Release handle, cable stops instantly
- Comes equipped to use 1 1⁄4″ (32 mm) cable to clean 3″ (75 mm) to 10″ (250 mm) lines through 300 feet (92 m).
- 6 HP gasoline engine drives cable via four-speed transmission. Allows the operator to vary the cable spinning speed to fit the application. Forward speeds of 333, 425 and 500 RPM, and a reverse speed of 250 RPM.
- Low-profile, four-wheel cart easily rolls to the job. Guards against machine upset and possible fuel spillage.
- Includes A-1 RIDGID® drain cleaning mitt and operator’s manual.
Specifications –
Machine Dimensions –
| Width Wheel to Wheel | 26″ (66 cm) |
| Length Including Kickstand | 28″ (71 cm) |
| Ground to Top of Handle | 38″ (97 cm) |
| Back of Handle to Front | 49″ (124 cm) |
| Ground to Top of Housing Shell | 27″ (60 cm) |
Ordering Information –
|
Catalog Number
|
Model No.
|
Description |
Weight
|
|
|
lb.
|
kg
|
|||
|
K-1500G
|
Machine Only with A-1 RIDGID Drain Cleaning Mitt, A-12 Coupling Pin Key and A-34-10 Rear Guide Hose, A-369-X 1¼” (32 mm) Jaw Set |
190
|
86.4
|
|
|
K-1500G w/C-14
|
Machine with Standard Equipment, includes: – Ten Sections Of C-14 Cable, Total 150 Feet (45,7 m) – Three A-8 Cable Carriers – A-1 Left-Hand RIDGID Drain Cleaning Mitt – A-12 Coupling Pin Key – A-34-12 Rear Guide Hose – A-2864 Hex Key – A-3516 Hex Key – A-3 Tool Box – T-2 Heavy-Duty Straight Auger – T-4 Heavy-Duty Funnel Auger – T-6 Retrieving Auger – T-8 Grease Cutter – T-13 Sawtooth Cutter – T-50 Sharktooth Cutter |
350
|
159.0
|
|
Tools –
|
Catalog Number
|
Model No.
|
Description |
Replac. Blade(s)
|
|
T-11
|
“H” Cutter, 2 1/2″ (65 mm) | ||
|
T-12
|
“H” Cutter, 3 1/2″ (89 mm) | ||
|
T-21
|
Spiral Sawtooth Cutter, 2 1/2″ (65 mm) | ||
|
T-24
|
4-Blade Cutter, 21/2″ (65 mm) | ||
|
T-25
|
4-Blade Cutter, 3 1/2″ (89 mm) | ||
|
T-26
|
4-Blade Cutter, 4 1/2″ (114 mm) | ||
|
T-26A
|
4-Blade Cutter, 5 1/2″ (140 mm) | ||
|
T-15A
|
Expanding Cutter, 4″ – 6″ (110-150 mm) | ||
|
61790
|
T-4
|
Heavy-Duty Funnel Auger |
–
|
|
T-2
|
Heavy-Duty Straight Auger |
–
|
|
|
T-15B
|
Expanding Cutter, 6″ – 8″ (150-200 mm) | ||
|
T-17
|
Spiral Bar Cutter, 6″ (150 mm) | ||
|
T-18
|
Spiral Bar Cutter, 8″ (200 mm) | ||
|
T-16
|
Spiral Bar Cutter, 4″ (110 mm) | ||
|
T-13
|
Sawtooth Cutter, 2 1/2″ (65 mm) | ||
|
T-14
|
Sawtooth Cutter, 3 1/2″ (89 mm) | ||
|
62840
|
T-1
|
Straight Auger |
–
|
|
T-10
|
Grease Cutter, 4 1/2″ (114 mm) | ||
|
63075
|
T-22
|
Spiral Sawtooth Cutter, 3″ (75 mm) | |
|
T-23
|
Spiral Sawtooth Cutter, 4″ (110 mm) |
97850
|
|
|
T-3
|
Funnel Auger |
–
|
|
|
T-31
|
Chain Knocker, For 3″- 4″ Pipe (75-110 mm) | ||
|
T-32
|
Chain Knocker, For 6″ Pipe (150 mm) | ||
|
63120
|
T-33
|
Chain Knocker, For 8″ Pipe (200 mm) |
97995
|
|
63145
|
T-38
|
Flue Brush, 1 1/2″ (40 mm) |
–
|
|
T-39
|
Flue Brush, 2″ (50 mm) |
–
|
|
|
T-40
|
Flue Brush, 2 1/2″ (65 mm) |
–
|
|
|
63160
|
T-41
|
Flue Brush, 3″ (76 mm) |
–
|
|
T-42
|
Flue Brush, 3 1/2″ (89 mm) |
–
|
|
|
63170
|
T-43
|
Flue Brush, 4″ (110 mm) |
–
|
|
T-44
|
Flue Brush, 4 1/2″ (114 mm) |
–
|
|
|
T-46
|
Flue Brush, 5 1/2″ (140 mm) |
–
|
|
|
T-5
|
Straight Retrieving Auger |
–
|
|
|
T-6
|
Funnel Retrieving Auger Run Machine In Reverse |
–
|
|
|
T-7
|
Hook Auger |
–
|
|
|
T-8
|
Grease Cutter, 2 1/2″ (65 mm) | ||
|
T-9
|
Grease Cutter, 3 1/2″ (89 mm) | ||
|
T-45
|
Flue Brush, 5″ (127 mm) |
–
|
|
|
T-50
|
Includes 3 Sizes: 3-4-5″ (75-110-127 mm) |
–
|
|
|
T-50-1
|
Sharktooth Cutter, 3″ (75 mm) | ||
|
T-50-2
|
Sharktooth Cutter, 4″ (110 mm) | ||
|
T-50-3
|
Sharktooth Cutter, 5″ (127 mm) |
Cables and Leaders –
|
Catalog Number
|
Model No.
|
Description |
Weight
|
|
|
lb.
|
kg
|
|||
|
C-10 PC
|
7/8″ (22 mm) x 15′ Cable with Inner Core (4,6 m) – Requires A-368-X Jaw set |
10
|
4.50
|
|
|
C-10
|
7/8″ (22 m) x 15′ (4,6 m) All- Purpose Wind – Requires A-368-X Jaw set |
9 1/2
|
4.30
|
|
|
62280
|
C-11
|
1 1/4″ (32 mm) x 15′ (4,6 m) Standard All-Purpose Wind. 3/8″ (10 mm) Pitch. Good for 4″ (110 mm) Traps, 3″ (75 mm) – 8″ (200 mm) Lines |
16
|
7.30
|
|
C-12
|
1 1/4″ (32 mm) x 15′ (4,6 m) Extra-Heavy- Duty Wind. 3/8″ (10 mm) Pitch. Recommended For 4″ (110 mm) – 10″ (250 mm) Long Runs, No 4″ (110 mm) Traps |
19
|
8.60
|
|
|
C-14
|
1 1/4″ (32 mm) x 15′ (4,6) Extra-Flexible Wind. 1/2″ (13 mm) Pitch. Recommended For 3″ (75 mm) – 10″ (250 mm) Lines Through Cleanout, No 4″ (110 mm) Traps |
16
|
6.80
|
|
|
62300
|
C-15
|
15′ (4,6) Extra-Flexible Wind. 1/2″ (13 mm) Pitch. Recommended For 3″ (75 mm) – 6″ (150 mm) Lines Good for Traps |
12
|
5.50
|
|
63090
|
T-27
|
1 1/4″ (32 mm) x 25″ (63,5 cm) Leader |
2 3/4
|
1.20
|
Accessories –
|
Catalog Number
|
Model No.
|
Description |
Weight
|
|
|
lb.
|
kg
|
|||
|
59205
|
A-1
|
Left-Hand RIDGID Drain Cleaning Mitt |
1/2
|
0.20
|
|
59225
|
A-12
|
Coupling Pin Key |
1/2
|
0.20
|
|
59240
|
A-17
|
Manhole Guide Pipe |
23
|
10.40
|
|
59295
|
A-2
|
Right-Hand RIDGID Drain Cleaning Mitt |
1/2
|
0.20
|
|
59300
|
A-20
|
8-Foot (2,4 m) Front Guide Hose Assembly |
25
|
11.40
|
|
59320
|
A-369X
|
1-1/4″ (32 mm) Replacement Jawset |
3/4
|
0.30
|
|
59360
|
A-3
|
Tool Box |
5
|
2.30
|
|
59395
|
A-34-12
|
12-Foot (3,7 m) Rear Guide Hose |
20
|
9.10
|
|
59415
|
A-34-10
|
10-Foot (3,1 m) Rear Guide Hose |
13 3/8
|
6.20
|
|
59440
|
A-4
|
Trap Spoon (30″, 76 cm) |
1 3/4
|
0.80
|
|
59470
|
A-8
|
Cable Carrier 60′ (18 m) Capacity 1 -1/4″ (32 mm) |
5 1/2
|
2.50
|
|
59475
|
A-9
|
Cable Carrier 150-Foot (45,7) Capacity 1-1/4″ (32 mm) |
14
|
6.40
|
|
59400
|
A-34-16
|
16-Foot (4,9 m) Rear Guide Hose |
26 1/2
|
12.00
|
