The RIDGID Model 258 Power Pipe Cutter cuts 2 1⁄2″ (65 mm) to 8″ (200 mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21 ft (6m) or nipple lengths of pipe is achieved quickly** without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for beveling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe.

Features

  • Square cut 21ft (6m) or nipple lengths of pipe without effort.
  • Easily cuts by displacing instead of removing pipe material.
  • No abrasive dust, dangerous sparks, or open flame.
  • Quickly cuts steel pipe with minimal burr.
  • Great for cutting pipe for groove joining.
  • Heavy-duty design is perfect for field or shop use.
  • Adaptable for beveling.

Specifications

  • Cutting Capacity 2 1D 2″ (65 mm) to 8″ (200 mm) schedule 10*/40 steel pipe
  • Powered by a model 700 Power Drive (not included)
  • Power Drive RPM 26-30 (no load)
  • Weight 105 lbs. (48 kg)

    Catalog Number
    Model No.
    Description
    Weight
    lb.
    kg
    50767
    258
    Pipe Cutter
    105
    48

    Accessories

    Catalog Number
    Model No.
    Description
    Weight
    lb.
    kg
    66687
    8 1/2″ H-D Cutter Wheel Assembly (includes HD Cutter Wheel, hub w/pins, cover plate)
    13
    6
    50812
    E-258
    8 1/2″ H-D Cutter Wheel only
    2
    1
    58222
    E258-T
    8 1/2″ Thin Wall Cutter Wheel Only (PVC and Steel)
    2
    1
    54397
    Transport Cart
    24
    11
    60002
    258PS
    Ball transfer Pipe Support 2 1/2″-12″ (65mm) to 12″ (300mm)
    21
    10
    61757
    Pipe Roller for Beveling (for Model 258 only)
    13
    6

    *Use the thin wall cutter wheel for best results.

    **Cutting time varies with pipe schedule and diameter.Note: Model 258 is not recommended to cut cast iron pipe.

    For Optimum wheel life always properly support the work piece with ball transfer pipe supports.